This manual describes the scanning method using ScandAll FCC Declaration. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The use of a shielded interface cable is required to comply with the Class B limits of Part 15 of. Canadian DOC Regulations. This digital apparatus does not exceed the Class B limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications.
The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are uniform among participating nations. Use in High-safety Applications. This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and general-purpose applications.
It has not been designed and manufactured for use in applications simply called "high-safety applications" from here on that directly involve danger to life and health when a high degree of safety is required, for example, in the control of nuclear reactions at nuclear power facilities, automatic flight control of aircraft, air traffic control, operation control in mass-transport systems, medical equipment for sustaining life, and missile firing control in weapons systems, and when provisionally the safety in question is not ensured.
The user should use this product with adopting measures for ensuring safety in such high-safety applications. PFU LIMITED assumes no liability whatsoever for damages arising from use of this product by the user in high-safety applications, and for any claims or compensation for damages by the user or a third party.
About the Use of Mercury. Lamp s inside this product contain mercury and must be recycled or disposed of according to local, state, or federal laws. Other product names are the trademarks or registered trademarks of the respective companies. Where there is no distinction between the different versions of the above operating system, the general term "Windows" is used. Where there is no distinction between the different versions of the above application, the general term "Adobe Acrobat" is used.
The version of Adobe Acrobat provided with this product may change without notice. If the instructions described in this manual differ from the actual displayed screen, refer to Acrobat's Help. Keep this manual in a safe place so that it can be easily referred to during use of this product.
While all efforts have been made to ensure the accuracy of all information in this manual, PFU assumes no liability to any party for any damage caused by errors or omissions or by statements of any kind in this manual, its updates or supplements, whether such errors are omissions or statements resulting from negligence, accidents, or any other cause.
PFU further assumes no liability arising from the application or use of any product or system described herein; nor any liability for incidental or consequential damages arising from the use of this manual. PFU disclaims all warranties regarding the information contained herein, whether expressed, implied, or statutory. Safety Precautions. This manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manual before you start to use this product.
In particular, be sure to read and fully understand the Safety Precautions described in this manual before you use this product. Also, store this manual in a safe place so that it can be easily referred to during use of this product. This indication alerts operators to an operation that, if not strictly observed, may result in severe injury or death.
This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or damage to equipment. Symbols Used In This Manual. This manual uses the following symbols in the explanations in addition to the warning indications.
This symbol alerts operators to particularly important information. Be sure to read this information. The drawing inside or under the circle shows the specific action that is not allowed. Outline characters on a colored background show instructions users should follow. Screen Examples In This Manual. The screen examples in this manual are subject to change without notice in the interest of product improvement.
If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while referring to the User's Manual of the scanner application you are using. Warning Label. The glass surface inside the ADF becomes hot during the operation.
Be careful not to touch the glass surface inside the ADF. Do NOT remove from the scanner, stain or scratch the warning labels. About Maintenance. A damaged AC cable may cause fire or electric shock. Do not place heavy objects on AC cables, or pull, bend, twist, heat, damage or modify AC cables. Do not use damaged AC cables or power plugs, or install any cables or power plugs to loose wall sockets.
Use only specified AC cables and connector cables. Please do not use the AC cable provided with this scanner for other devices, since this might cause equipment failure and other troubles or an electric shock. Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips. Use this scanner only at the indicated power voltage and current.
Improper power voltage and current might cause fire or electric shock. Do not touch the AC cable with wet hands. Do not touch the power plug with wet hands. Doing so can cause electric shock. Wipe off any dust from metal parts on the power plug or metal fittings with a soft, dry cloth. Do not install the device in locations that has oil smoke, steam, humidity, and dust. Do not install the scanner in locations subject to oil smoke, steam, humidity, and dust. Doing so might cause a fire or electric shock.
If the scanner is damaged for any reason, turn the scanner off and unplug the power cable. Contact the store where you purchased the scanner. If you detect heat coming from the device or detect other problems such as smoke, strange smells or noises, immediately turn off the scanner and disconnect its power plug.
Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider. Do not insert or drop metal objects in to the scanner. Do not scan wet documents or documents with paper clips or staples. Do not splash or allow the scanner to get wet. If foreign objects water, small metal objects, liquids, etc.
Pay particular attention to this warning in households where there are small children. Do not take apart or modify the scanner. The inside of the scanner contains high-voltage components.
Touching these components might cause electric shock or fire. Make sure that the scanner is installed on a flat, level surface and that none of its parts extend beyond the surface top, such as a desk or table. Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of vibration to prevent it from falling. Install the scanner on a strong surface that will support the weight of the scanner and other devices.
Firmly insert the power plug as far it can go into the power outlet. Align the edges of the documents. Confirm that all the documents have the same width. Check the number of sheets in the document stack. The standard number of sheets that can be loaded on the scanner is as follows: For details, see "7. Load the document on the ADF paper chute. Pull out the ADF paper chute extension. Adjust the side guides to the width of the documents. Move the side guides so that they touch both sides of the documents.
If there is any space between the side guides and the edges of documents, the scanned image may be skewed. Lift the paper stop and swing it forward by inserting your fingertips into the indentaitons on the scanner as shown in the figure below. Lift up the document cover. Load the document on the document bed with the scanning face down and the top left corner aligned with the reference point.
The [Select Source] dialog box appears. Click the [Scan To View] button on the tool bar. Set the scan resolution, paper size and other scan conditions, and click the [Scan] button. Page Fujitsu Twain32 Scanner Driver 2. The following describes the procedure with examples of ScandAll 21 for ordinary scanning by using this driver software.
Configure settings for scanning and click the [Scan] button. Depending on the settings of the application software, images may not be displayed.
For details, refer to the documentation or Help file of your application. Page Paper Size 2. The following describes the main setting items.
Page 41 [Reset] button Used to undo changes of settings. The window also opens by pushing the [F1] key. Page 42 Selects this tab when setting cache mode, multi feed detection, blank page skipping, etc. Page Fujitsu Isis Scanner Driver 2. The following describes the procedure with examples of QuickScan for ordinary scanning by using this driver software.
Page 45 Scanning will be started according to the settings of the selected profile. Page 47 2. The [Profile Editor] window appears. Click the [OK] button to return to [New batch] dialog. Distinguishes black from white according to the fixed threshold.
Dither Pattern 0 This setting is suitable for scanning dark photographs. Select a standard paper size from the list. Paper Layout Specifies orientation of the documents as portrait or landscape. Used for setting the compression rate of JPEG transfer. Used for setting advanced features. End of Page Detection Scans the edge bottom of the documents and outputs data adjusted to the document length.
When any page shorter than specified "Paper Size" Low, Mid, High Emphasizes contour of images. For details on how to load documents, see "2. Click the [Scan] button. Open the document cover. Remove the document cover as shown in the figure below. Refer to "2. When scanning ends, re-attach and gently close the document cover.
Load the document on the document bed face down. Load the documents on the ADF paper chute. For details on loading documents, refer to "2. Specify the length of documents and then click the [OK] button. Images of scanned documents are displayed on the window of ScandAll Be sure to scan only documents of the same width together. The following shows the procedure for scanning a batch of mixed size documents. Load the documents on the ADF paper chute or flatbed.
Start up ScandAll To end scanning, click the [Close] button. Enter the file name and select the destination to save the scanned image. For details, refer to ScandAll 21 Help. This starts up Adobe Acrobat. It is recommended to change the settings with the following procedure. Click the [Image Settings The "Image Settings" dialog box appears.
Select the scan resolution, document size and other scan conditions, and click the [Scan] button. It has not been designed and manufactured for use in applications simply called "high-safety applications" from here on that directly involve danger to life and health when a high degree of safety is required, for example, in the control of nuclear reactions at nuclear power facilities, automatic flight control of aircraft, air traffic control, operation control in mass-transport systems, medical equipment for sustaining life, and missile firing control in weapons systems, and when provisionally the safety in question is not ensured.
The user should use this product with adopting measures for ensuring safety in such high-safety applications. PFU LIMITED assumes no liability whatsoever for damages arising from use of this product by the user in high-safety applications, and for any claims or compensation for damages by the user or a third party.
Lamp s inside this product contain mer- H g cury and must be recycled or disposed of according to local, state, or federal laws. Other product names are the trademarks or registered trademarks of the respective companies. Where there is no distinction between the different versions of the above operating system, the general term "Windows " is used.
All the descriptions in this manual assume the usage of Adobe Acrobat bundled with this product. However, Adobe Acrobat may be upgraded without notice. The user must not perform repairs on this scanner. This indication alerts operators to an operation that, if not strictly. This symbol alerts operators to particularly important information. Be sure to read this information. The drawing inside or under the circle shows the specific action that is not allowed.
The glass surface inside the ADF becomes hot during the operation. Be careful not to touch the glass surface inside the ADF. The screen examples in this manual are subject to change without notice in the interest of product improvement.
If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while referring to the User's Manual of the scanner application you are using. A damaged AC cable may cause fire or electric shock. Do not place heavy objects on AC cables, or pull, bend, twist, heat, damage or modify AC cables.
Do not use damaged AC cables or power plugs, or install any cables or power plugs to loose wall sockets. Use only specified AC cables and connector cables.
Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips. Use this scanner only at the indicated power voltage and current. Improper power voltage and current might cause fire or electric shock. Do not connect to multiplepower strips. Do not touch the power plug with wet hands. Doing so might cause electric shock.
Wipe off any dust from metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust might cause fire or electric shock. Do not install the device in locations that has oil smoke, steam, humidity, and dust.
Do not install the scanner in locations subject to oil smoke, steam, humidity, and dust. Doing so might cause a fire or electric shock. If the scanner is damaged for any reason, turn the scanner off and unplug the power cable.
Contact the store where you purchased the scanner. Do not insert or drop metal objects in to the scanner. Do not scan wet documents or documents with paper clips or staples. Do not splash or allow the scanner to get wet. If foreign objects water, small metal objects, liquids, etc. Then, contact the store where you bought the scanner or the Maintenance Service Center.
Pay particular attention to this warning in households where there are small children. Do not take apart or modify the scanner. The inside of the scanner contains highvoltage components. Touching these components might cause electric shock or fire. If you detect heat coming from the device or detect other problems such as smoke, strange smells or noises, immediately turn off the scanner and then disconnect its power plug.
Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider. Make sure that the scanner is installed on a flat, level surface and that none of its parts.
Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of vibration to prevent it from falling.
0コメント